OUR PRIMARY MACHINE SHOP EQUIPMENT:

WOOD WIZ SLAB PLANER & SANDER

The machine allows precise surfacing and finishing capable of up to 6 ft wide and 18 ft in length. The machine handles everything from slabs to burls to tabletops, including recycled timber. The operator can adjust the speed when required to suit the job-piece and produce a perfect finish without any tear out, ridging or burn marks.

42” BUTFERING THREE WIDE BELT SANDER

The 42” triple wide belt sander is used to machine stock flat and to specific thicknesses. A rubber conveyor carries stock through the machine while three wide abrasive belts remove material from the top surface in a single pass.

Highly versatile machine that works well for a variety of woodworking applications. These powerful industrial solutions make use of combinations of contact drums and platens to finish wooden surfaces, holding tight tolerances while providing an exceptional end product.

LOUVER GROOVER

This machine is used to provide extremely precise cutting for interior & exterior shutter manufacturing and assembly. It provides automatic, pneumatic slot cutting with double sided drilling or slot cutting capability.

SCMI FOUR HEAD MOULDER

Our four head wood moulder is a machine used to shape wood with custom profiled cutters. The machine planes and moulds boards on all four sides in a single pass into a variety of professionally finished products. 

The profiled cutters are also known as knives, and blades. Tooling refers to cutters, knives, blades including planer blades, and cutterheads. The blades are secured into four individual cutterheads that mount on two vertical and two horizontal shafts.

24” OLIVER MODEL #299 WOOD PLANER

A thickness planer is a woodworking machine utilized to trim boards to a consistent thickness throughout their length and flat on both surfaces. Our industrial thickness planer is capable of accepting very wide boards up to 24” wide and removing large amounts of material in a single pass. This machine is driven by powerful 7.5 hp motor, utilizing an inserted tooth cutting head (“ITCH”).

16” DIEL STRAIGHTLINE RIP SAW

Our 16” Straight Line Rip Saw is a wood saw that is specially designed for making a rip cut, or a cut made parallel to the direction of the wood grain, as opposed to a crosscut, a cut made perpendicular, or across the wood grain. The saw is also utilized for ripping random width material. Straight lines are very versatile in that they allow the operator to rip virtually any combination that’s needed from a cut list. The saw offers the benefit of providing an excellent glue-line quality rip. A glue line cut means that the cut is perfectly straight and free of saw marks, allowing the part to go straight to the assembly glue up table without further processing.

36” TANNEWIZ BANDSAW

Our industrial 36” band saw is used to cut curves, even in thick lumber, such as in creating cabriole legs, to rip lumber and to crosscut short pieces. The most common use for the band saw, however, is in cutting irregular shapes. The second most common use is in resawing or ripping lumber into thinner slabs.

OAKLEY H5 OSILLATING EDGE SANDER

The Oakley Oscillating Edge Sander is designed to precisely sand the edges of boards. The up-and-down action helps eliminate sanding grooves in the edge of the board and allows even wear on the abrasive sanding drum.

© 2020 Cummings Woodworks - All rights reserved.